Series 2 Hardwire Kit


The Series 2 Hardwire Kit contains all the components required to easily piggyback on the fuse box of any vehicle. Simply plug the required fuse tap cable into the vehicle’s fuse box to provide the camera with its own power supply.

This allows the Dash Cam to be installed in your vehicle without the need to use the 12V outlet (car cigarette socket). The cable also includes a blue LED indicator to show when there is power available and when a Dash Cam is connected.

If fitted to a permanent live supply, the inbuilt minimum voltage limiter will protect the vehicle's battery from going flat. With the Hardwire Kit installed on a switched live supply, the Dash Cam will power on and start recording automatically when the vehicle is opened or starts.

Compatible with 12-24V for car or truck installations. Total cable length is 5m, so the cable can easily be hidden away for a neat installation. Includes: 5V Mini USB power cable, 2 Amp ATO/C fuse (standard), 2 Amp ATM fuse (mini), Fuse tap table (standard), Fuse tap cable ATM (mini) and Ferrite core to remove electrical  interference.

Total Length = 5 metres. 

This is compatible for use with the following Dash Cam models: 622GW, 522GW, 422GW, 322GW, 222G, 222X, 222, 122HD, 122, 380GWX, 380GW, 300W, DuoHD, 612GW, 512GW, 412GW, 312GW, 312G, 212G, 212, 112 and MIRROR. 


Compatible with

  • 622GW
  • 322GW
  • 222G
  • 522GW
  • 222
  • 222X
  • 422GW
  • 122
  • 122HD
  • 380GWX
  • 380GW
  • 300W
  • DuoHD
  • 612GW
  • 512GW
  • 412GW
  • 312GW
  • 212G
  • 212
  • 112
  • 312G